![]() ![]() Make sure input channel is set to “Left Channel” and monitor is set to on.Ĭhange Input Source to “Internal Mic” of you are using ONE’s built in mic, “External Mic” if you are using a dynamic or ribbon mic, and “External 48volt mic” if you are using a condenser mic. If you want to record vocals or an acoustic instrument, click on the track icon, then click the plus button to add a new track. Press record in GarageBand’s transport control, and begin recording. We have “instrument” selected, so you will see the guitar icon is lit. The four icons on the top panel indicate which input or output source you have selected. ONE can control input and output level with a single knob. ![]() Since we plugged into ONE’s instrument input, set the “Input Channel” in GarageBand to “Right Channel.” In GarageBand, “Left Channel” is channel 1 and “Right Channel” is channel 2. The instrument input is always on.įor now, select “Internal Mic + Instrument.” With ONE you can record one instrument and one microphone of your choice at the same time. Since we created a guitar track in GarageBand, we will plug a guitar into ONE’s quarter-inch instrument cable.Ĭlick on the “Input Option” button, and then select “Input Settings.” You should now see GarageBand open with a default guitar amp. In GarageBand on Mac, set the instrument or microphone input source for each track you want to record to. – iOS version 5.1.1 or greater and a compatible iPhone, iPad or iPod touch.Ĭlick the plus icon to start a new project.įor the purpose of this tutorial, choose guitar amp in the Instruments window. Make sure your audio interface is connected to a power source if necessary and turned on. Connect your microphones to your audio interface using the required cables. Connect your audio interface to your Mac using the required cables. In this tutorial we will show you how to set up Apogee ONE in GarageBand and begin recording quickly on iPad. Follow these steps to use two mics on GarageBand for your Mac. If you want feedback on your podcast intro, send it to You can also send me your podcasting questions and tutorial requests.Apogee ONE – Recording in Garage Band on iPad, iPhone and iPod touch I’ve changed my own podcast intro a few times!Ĭheck out Part 1 of this tutorial to learn how to record a professional sounding voice over in Garageband. The good news is that you can always change it down the road. It doesn’t have to be fancy! Keep is short, informative, and to the point. The purpose of the intro is to inform your audience about what your show or episode is about. You have the power to create a professional sounding podcast intro on a limited budget when you do it yourself. ![]() I have tried playing music on my computer to make sure the audio is working, and it is. But when I go back to the beginning & hit the play button, no sound comes out. Garageband may try to use it as the default microphone.ĭon’t be intimidated by some of the overproduced podcast intros you hear. As I speak into the microphone, the track shows the squiggly lines that would seem to indicate it is recording my voice onto Garage Band.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |